Oppo udp-203, User Manual

Page: 20 / 98

C O M M O N C O N N E C T I O N M E T H O D S
15
Connecting to an A/V Receiver or Amplifier via Analog Outputs

The UDP-203 is equipped with a 7.1ch analog audio output that can be connected to the 7.1ch
analog input section of an A/V receiver or amplifier for audio output. This method is required if the
A/V receiver does not have HDMI inputs. It is also a preferred connection method for taking
advantage of the UDP-203
’s advanced digital-to-analog converter (DAC).

Please use up to 8 RCA-style audio interconnect cables to connect the FL (Front Left), FR (Front
Right), SL (Surround Left), SR (Surround Right), C (Center), SW (Subwoofer), SBL (Surround Back
Left) and SBR (Surround Back Right) analog output terminals of the UDP-203 to the corresponding
multi-channel analog audio input jacks of your A/V receiver or amplifier.

If the A/V receiver or amplifier only has 5.1ch audio inputs, you can omit the SBL (Surround Back
Left) and SBR (Surround Back Right) outputs. In the
Setup Menu , set the Down Mix Mode to 5.1ch
in the Speaker Configuration section (refer to Down Mix Mode on page 64).

If your audio system offers only stereo audio inputs, or if you would like to connect a dedicated stereo
audio system in addition to the surround audio system which is already connected to the HDMI or
S/PDIF outputs, you can connect the dedicated stereo audio system to the FL (Front Left) and FR
(Front Right) outputs of the player. In the
Setup Menu , set the Down Mix Mode to Stereo in the
Speaker Configuration section (refer to Down Mix Mode on page 64).