Oppo udp-203, User Manual

Page: 15 / 98

I N T R O D U C T I O N
10
Changing the Remote Code
The remote control contains three OPPO remote codes. The default is Code 1. If you have other OPPO
products placed close to the UDP-203, they may inadvertently respond to the UDP-203 remote control. To
prevent this, you can select a different remote code.
To select a new remote code, open the battery compartment cover of the remote control, and then use a ball
point pen to flip the switch to one of the positions marked as 1, 2, or 3. Close the battery compartment cover.
Make sure that the UDP-203 player is turned on and that the disc tray is ejected. Aim the remote control at the
player. Press and hold the
ENTER button for 5 seconds. The player will start using the new remote code.
Motion Sensitive Backlight
The remote control features a motion sensor to activate the backlight for five seconds when you pick up
the remote or press a button on the remote.
To disable or enable the backlight, press the DIMMER and 0 buttons at the same time on your remote.