Biopel MINI - Installation and Operation Instructions
26
5. Container filled
Enter that the pellet hopper has been filled. If Hopper Calibration has been performed in the
Installation Menu, the unit main panel displays 100% pellet level.
To display the fuel quantity indicator correctly, you must first calibrate the fuel consumption in the
Hopper Calibration function in the Installation Menu.
6. Boiler's weekly
programme
Allows weekly adjustment of CH temperature during each hour, every day of the week. BY + - 20°C. If
one of the modes is activated, the current temperature lowering is then displayed on the Main Panel
under Set CH temperature.
6.1 Mode 1 (Mon-Sun)
Activates Mode 1.
6.2 Mode 2 (Mon-Fri) (Sat-
Sun)
Activates Mode 2.
6.3 Mode 1 settings
Select the desired adjustments to CH temperatures for Mode 1.
6.4 Mode 2 settings
Select the desired adjustments to CH temperatures for Mode 2.
7. Alarm History
Displays alarm history and operating messages.
8. Disinfection
Thermal disinfection works in conjunction with DHW heating and can only be activated if the DHW
pump is activated in Main Settings, Operating Modes. Thermal disinfection raises the set DHW
temperature to the minimum value required for successful disinfection (min. 60°C) throughout the
entire DHW circuit.
9.1 Display settings
Change any settings relating to the main display settings of the v9 MINI unit, such as display
brightness, display saving, etc.
9.2 Main panels
Display the different types of main panels (main display data).
9.2.1 Panel view
Display for the end user.
9.2.1.1 Manufacturer's
screen
Display for the installer.
9.2.1.2 Display brightness
Change display brightness for its better visibility.
9.3 Display saving mode
Select the brightness during the display power saving mode to save power consumption.
9.4 Extinction time
Select how long it takes for the display to go into power saving mode if the user does not use it for
that time period.
9.5 Alarm sound
Activates/deactivates the sound during an alarm situation.
9.6 Button sound
Activates/deactivates the sound when the touchscreen is pressed.
9.7 Programme update
Forcibly updates the programme in the v9 MINI control unit. The standard way to update the
programme in the control unit and external socket is described in the chapter Firmware update.
10. Factory settings
Reset the user changed Main Settings values to the factory values.
11. Programme
Information
Current programme version. Caution: There are two programme types (firmware) - for the v9 MINI
display and for the control unit. For more information on uploading a new programme, see the
chapter Updating the Firmware.
The items in the Main Menu do not have a significant effect on boiler operation. If you are unsure regarding setting any of the
functions, we recommend that you consult a certified installer or a representative of OPOP spol. s.r.o. for the correct setting.
We will be happy to assist you in explaining all items not only in the Main Settings but also other control unit settings.
Following is the Installation Menu, which is for the Installer to set-up the combustion process and activate additional devices.
This menu is not secured by a code, so it can be modified by the boiler owner, but it is recommended to consult a certified
installer or manufacturer's representative for any changes.
