ET 200X(L) Series Digital Gateway User Manual
28/78
Double Answer
This will cause that every answer signal is changed by answer->clear back->answer,
sort of flash
Skip Category
Skip request of calling party category and ANI
CASNonR2 Bits
Which bits are never used
CAS_R2_Bits
Which bits will be used
Figure 3-4-4 Timer
Table 3-4-3 Definition of Timer
Options
Definition
MF Back Cycle
Max amount of time our backward MF signal can last
MF Back Resume Cycle
Amount of time we set MF signal ON to resume the MF cycle with
a MF pulse
MF Fwd Safety
Safety FORWARD timer
R2 Seize
How much time do we wait for a response to our seize signal
R2 Answer
How much to wait for an answer once the call has been accepted
Metering Pulse
Hoe much to wait for metering pulse detection
R2 Double Answer
Interval between ANSWER-CLEAR BACK-ANSWER when double
answer is in effect
R2 Answer Delay
Minimum delay time between the Accept tone signal and the R2
answer signal
CAS Persistence Check
Time to wait for to CAS signaling before handing the new signal
DTMF Start Dial
Safety time before starting to dial DTMF
