OpenVox ET2001 User Manual Download Page 59

Page: 59 / 78

ET 200X(L) Series Digital Gateway User Manual

59/78

reload Asterisk.

7.4 Auto Provisioning

Auto provisioning or auto-configuration is an easy, flexible and time-saving way to upgrade firmware

and configurations for E1 gateways in mass deployment. With auto provisioning, all user information can

be entered via the central ACS (Auto Configuration Server). ACS can be DHCP server or TFTP, HTTP

and FTP server. It will not take effects immediately but in the next time system is power on. It could be

postponed the execution of restart system also.

Note that system will not be upgrade the firmware and update configurations if the connection

between ACS and gateway is disconnect.

7.4.1 Preparation

The following should be prepared before anto provisioning being applied.



Enable the auto provisioning in gateway



The ACS has been prepared



The network between gateway and ACS is connected

7.4.2 Configuring gateway

Usually, the feature is disabled before being on sale. To activate the auto provisioning function,

please follow the procedures as below.

Step 1

On the

ADVANCED

Auto Provision interface

Step 2

Enable the ‘Enabled’ option and select ACS. DHCP option 66 can be enabled if ACS has been

work as DHCP server, otherwise please select protocol of provisioning and fill the value of ‘

Auto

Config Server URL

’. Username and password may need to be filled in FTP/HTTP for the purpose

of system safety. Do not forget to select Firmware upgrade, upgrade mode and fill the value of

timeout, and click ‘

Save

’

Step 3

Set interval of checking in

LOGS

System notice

then enable it, and click ‘

Save

’

Summary of Contents for ET2001















































































Search results

Summary of Contents for ET2001

Reviews:

Related manuals for ET2001

Brands by name

Popular brands

OpenVox ET2001, User Manual

Search results

Summary of Contents for ET2001

Reviews:

Related manuals for ET2001

Brands by name

Popular brands