ET 200X(L) Series Digital Gateway User Manual
22/78
name_initial
: Use display text in SETUP/CONNECT messages as the
party name.
name_update
:
Use
display
text
in
other
messages
(NOTIFY/FACILITY)for COLP name update.
name
: Combined name_ initial and name_ update options.
text
: Pass any unused display text data as an arbitrary display message
during a call. Sent text goes out in default to ‘name’.
Display Receive
Send/receive ISDN display IE options. The display options are a comma
separated list of the following options:
block
: Do not pass display text data.
name_initial
: Use display text in SETUP/CONNECT messages as the
party name.
bame_update
:
Use
display
text
in
other
messages
(NOTIFY/FACILITY)for COLP name update.
name
: Combined name_ initial and name_ update options.
text
: Pass any unused display text data as an arbitrary display message
during a call. Sent text goes out in default to ‘name’.
Overlap Dialing
Enable overlap dialing mode--sending overlap digits.
Allow
Progress
When
Call
Released
Allow inband audio (progress) when a call is DISCONNECT Ted by the
end of a PRI
Out-of-Band Indications
PRI Out of band indications. Enable this to report Busy and congestion
on a PRI using out_ of_ band notification. Inband indication, as used by
the gateway doesn’t seem to work with all telcos.
Facility-based
ISDN
Supplementary Services
To enable transmission of facility-based ISDN supplementary services
(such as caller name form CPE over facility), enable this option. Cannot
be changed on a reload.
Exclusive Channel Selection
If you need to override the existing channels selection routine and force
all PRI channels to be marked as exclusively selected, set this to yes.
priexclusive cannot be changed on a reload.
