Open 824RL Technical Reference Download Page 34

Page: 34 / 113

Technical Reference

OPEN824RL / RLW ADSL / VoIP Routers

The following table lists the

Bridge Interface

options along with their corresponding VLAN Ports:

Bridge Interface

VLAN Port (Always starts with)

Ethernet

P1 / P2 / P3 / P4

Ethernet1

P2 / P3 / P4

Ethernet2

P3 / P4

Ethernet3 P4

The Management Interface of the

Device Management

area of the screen specifies which VLAN group will

manage the device, like doing web management.

NOTE:

NAT / NAPT can be applied to management interface only.

Ethernet

From the

Configuration

menu list,

Click

LAN,

then

Ethernet

The following appears:

The following table lists

Primary IP Address (

area of the

Ethernet

screen) fields and their definitions:

Field Definition

IP Address

The default IP on this router.

SubNetmask

The default subnet mask on this router.

RIP

RIP v1, RIP v2 and RIP v2 Multicast. Check to enable RIP function.

Summary of Contents for 824RL


















































































































Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands

Open 824RL, Technical Reference

Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands