Open 824RL Technical Reference Download Page 33

Page: 33 / 113

Technical Reference

OPEN824RL / RLW ADSL / VoIP Routers

Configuration

When you click this item, you get following sub-items to configure the ADSL router.

LAN

WAN

System

Firewall

VoIP

QoS

Virtual Server

Time Schedule

Advanced

These functions are described below in the following sections.

There are nine items within the LAN section:

Bridge Interface

Ethernet

IP Alias

Ethernet Client Filter

Wireless

Wireless Security

Wireless Client Filter

Port Setting

DHCP Server.

LAN (Local Area Network)

Bridge Interface

You can set up member ports for each VLAN group under the Bridge Interface section. From the example, two
VLAN groups need to be created.

To Access The Bridge Interface Screen:

From the

Configuration

menu list,

Click

LAN,

then

Bridge Interface

The

Bridge Interface

screen appears. (See below.)

Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4). Please uncheck P2, P3, P4 from Ethernet VLAN port first.

NOTE:

You should set up each VLAN group with caution. Each Bridge Interface is arranged in this order.

Summary of Contents for 824RL


















































































































Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands

Open 824RL, Technical Reference

Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands