Open 824RL Technical Reference Download Page 54

Page: 54 / 113

Technical Reference

OPEN824RL / RLW ADSL / VoIP Routers

ADSL

Accessing the ADSL Screen:

From the

Configuration

menu list,

step 1

Click

WAN

ADSL

. The following appears:

step 2

Update the fields as required, then click

Apply.

The following table lists the

ADSL Parameters

screen fields and their definitions:

Field Definition

Connect Mode

The default setting is

Multimode.

This mode will automatically detect your ADSL line code,

G.DMT, G.Lite and T1.413. However in some areas, multimode cannot detect the ADSL line
code well. If this is the case, please adjust the ADSL line code to G.DMT.

Activate Line

Aborting (false) your ADSL line and making it active (true) again for taking effect with setting of

Connect Mode.

Coding Gain

Configure the ADSL coding gain from 0dB to 7dB, or Automatic.

Tx Attenuation

Setting ADSL transmission gain, the value is between 0 – 12.

DSP Firmware Version

Current ADSL line code firmware version.

Connected

Displays the current ADSL line sync status.

Operational Mode

Displays the current ADSL mode standard (Operational Mode) your router is using when the
ADSL line has sync.

Annex Type

ADSL Annex A, which works over a standard telephone line. Annex B, which works over an
ISDN line.

Upstream

Displays the current upstream rate of your ADSL line.

Downstream

Displays the current downstream rate of your ADSL line.

Summary of Contents for 824RL


















































































































Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands

Open 824RL, Technical Reference

Search results

Summary of Contents for 824RL

Reviews:

Related manuals for 824RL

Brands by name

Popular brands