background image

Safety and Installation Manual

 10.0

Customer Support

➢ 

Technical support shall be provided by the installer to final customer.

➢ 

Open Renewables

®

 provides technical support through the distributor to Installer.

➢ 

End customers can visit Open Renewables

®

  website,  

www.openrenewables.com

  to obtain technical support or  

additional information.

 10.1

Product Certification

Open Renewables

® 

High Quality modules are certified accordingly to IEC 61215:2005 and IEC 61730:2008 by Tüv Rheinland

® 

in Germany.  You can retrieve the latest certificates at Open Renewables web page  

www.openrenewables.com

 

 .  

 10.2

Factory Certification 

Open   Renewables

®  

High   Quality   modules   are   build   in   ISO9001:2008   certified   factories.   You   can   retrieve   the   latest 

certificates at Open Renewables web page  

www.openrenewables.com

 

 .  

 10.3

Contacts

Open Renewables, SA
Rua Anibal Tavares 
Apartado 332
7002-506 Évora
Portugal

[email protected]
www.openrenewables.com

 10.4

Disclaimer of Liability

Because   the   use   of   this   Safety,   Installation   and   Operation   Manual   and   the   methods   and   conditions   of   handling,  
installation, operation and maintenance of the PV modules are beyond Open Renewables

®

  control, Open Renewables

® 

does not assume responsibility and disclaims liability for loss, damage, injury or expense arising out of or in any way 
connected   with   such   handling,   installation,   operation   or   maintenance   of   the   Open   Renewables

®

  PV   modules.   Open 

Renewables

®

 assumes no responsibility for any infringement of patents or other rights of other parties that may result from  

use of the PV modules. No license is granted implicitly or otherwise under any patent or patent rights. The information  
provided in this Safety, Installation and Operation Manual including suggestions do not constitute a warranty, expressed or  
implied. Open Renewables

®

 reserves the right to make changes to the product, specifications or this manual without prior 

notice. This document may be provided in several languages. In case of a conflict among versions, the English language  
version prevails.

Page  10 of 12

Document ID: OR-MA-2XX Revision 4.50 04-03-2013

© 2013 Open Renewables

®

 – All rights reserved

EN

Applicable only in European Union

Summary of Contents for 175-ME48













Reviews: