ONTIME
|
PHANTOM
EBIKE MANUAL
|
VERSION 1.0
34
5.
6
.1.12 “Set Clock”
Press the or (<0.5S) Button to access the
“Set Clock” menu. Then briefly press the
(<0.5S) button to confirm selection. Now
press the or (<0.5S) button and input the
correct number (time) and press the
(<0.5S) button to move to the next number.
After entering the correct time, press the
(<0.5S) button to confirm and save.
5.
6
.2 “Information”
Once the system is turned on, quickly Press the
(<0.5S) button twice to access the "SET-TINGS"
menu. Press or (<0.5S) button
to select "Information", and then press the
(<0.5S) button to confirm your selection. Or select the
point "Back" by confirming with the (<0.5S) button to
return to the main menu.
5
.
6
.2.1 Wheel Size and Speed Limit
The "Wheel Size” and "Speed
Limit” cannot be changed, this
information is here to be viewed
only.
5.
6
.2.2 Battery Information
Press the or (<0.5S) button to access the
Battery Info menu, and then press the
(<0.5S) button to select confirm. Now press the
or (<0.5S) button and select "Back” or “Next
Page". Then press the
(<0.5S) button to confirm,
now you can read the battery information.
Content
Explanation
TEMP
Current temperature in
degrees (°C)
TotalVolt
Voltage (V)
Current
Discharge (A)
Res Cap
Remaining Capacity (A/
h)
Full Cap
Total Capacity (A/h)
RelChargeState
Default Loader Status (%)
AbsChargeState
Instant charge (%)
Cycle Times
Charging cycles
(number)
Max Uncharge Time
Maximum time in which no
charge was made (Hr)
Last Uncharge Time
Total Cell
Number (individual)
Cell Voltage 1
Cell Voltage 1 (m/V)
Cell Voltage 2
Cell Voltage 2 (m/V)
Cell Voltage n
Cell Voltage n (m/V)
HW
Hardware Version
SW
Software Version
NOTE:
If no data is detected, "--" is displayed.
