Onset
Computer
Corporation
User’s Guide
- 18 -
HOBO U30 Station/RC
I n i t i a l H a r d w a r e S e t u p
Before you take the U30 Station into the field for deployment you should perform some preliminary
hardware assembly and configuration.
There are three parts to this procedure:
•
Basic Setup (Required)
•
Network Settings (U30 Wi-Fi) (Optional)
•
Analog Sensor Ports or TRMS Module (TRMSA-D)(Optional)
Everyone must perform Basic Hardware Setup first. Follow the procedure from there if you need to
configure Network Settings or Analog Sensor Ports/TRMS Module.
Before you Begin
This procedure assumes that you have already created a HOBOlink account and registered the U30
Station. You should register the U30 Station before you connect the battery and have it connect to
HOBOlink. See Initial HOBOlink Setup on page 17.
Items for Setup
If you are using the Smart Sensor Expander Board
•
Smart Sensor Expander Board
•
Expander cable
•
Bladed screwdriver or chisel and a file for removing cover of Secondary Cable Bay
If you are using Analog Sensors or Relay Contact
•
Small flat-head screw driver
Start Here
: Basic Hardware Setup (page 19)
Summary of Contents for hobo u30
Page 1: ......
