Onset
Computer
Corporation
User’s Guide
- 17 -
HOBO U30 Station/RC
I n i t i a l H O B O l i n k S e t u p
Before you connect the battery to the U30 Station, you should perform this procedure to setup your
HOBOlink account and perform initial configuration for the U30.
For more details, see the
HOBOlink Quick Start Guide
and the
HOBOlink Help
.
Steps
1.
Go to www.hobolink.com and create a HOBOlink account.
2.
Activate your account by responding to the Activation e-mail.
3.
Log into your HOBOlink account and register the U30 that you are configuring.
4.
Configure the
Logging Interval
in the
Launch Configuration
pane.
For this test, configure a
Logging Interval
just long enough to record data that you can verify. You
will later change this to you required interval for deployment.
5.
Configure the
Connection Interval
in the
Readout Configuration
pane.
For this test, you may want to configure a frequent Connection Interval so that you can verify
proper operation without having to wait as long for updates. For the U30/GSM, this will be limited
by the Fastest Connection Allowed by your Communication Plan. To bypass your GSM
Communication Plan restrictions for testing see below.
Once you confirm the readouts are occurring as they should, you can change the Connection
Interval to your desired on-going schedule for deployment.
NOTE
: For testing, you can bypass your GSM Communication Plan restrictions by manually
connecting to HOBOlink using HOBOware (direct connection using supplied USB Cable). From the
main menu select
Status
, and then click the
Contact HOBOlink
button. After the test disconnect
the U30 from the computer. The U30 will connect to HOBOlink at the next scheduled Connection
Interval.
NEXT TASK
: Initial Hardware Setup (page 18).
Summary of Contents for hobo u30
Page 1: ......
