ONOSOKKI DS-0501, Instruction Manual, Page: 59 / 62

■ Hardware Recognition
After the O - Solution is started normally, channels are assigned to the connected hardware according to the following
rules.
・ Assignment of channels is determined in the connection order of hardware connection cable for
synchronization.
The DS
- 5000 series Data Station with the hardware connection cable connected to only the SYNC OUT side
becomes the first unit.
For the subsequent hardware, channel numbers are assigned automatically by the O
- Solution in the connection
order of hardware connection cable.
・ The channel number assigned to each unit of hardware can be checked with the O - Solution.
・ Even if the hardware connection cable for synchronization is connected wrongly in a manner unmatched with the
LAN cable for communication as shown below, the O
- Solution is started.
At this time, the hardware B with the hardware connection cable connected to only the SYNC OUT side is
recognized as the first unit, and channel numbers are assigned from the hardware B.
LAN
SYNC
IN
OUT
LAN
SYNC
19 V 3.5 A MAX
DC INPUT
MADE IN JAPAN
ONO SOKKI
Windows© Embedded
LAN
SYNC
IN
OUT
LAN
SYNC
19 V 3.5 A MAX
DC INPUT
MADE IN JAPAN
ONO SOKKI
Windows© Embedded
3HUVRQDO FRPSXWHU
/$1 FDEOH IRU FRPPXQLFDWLRQ P
+DUGZDUH FRQQHFWLRQ FDEOH IRU V\QFKURQL]DWLRQ $;ق ۜك $;ق ۜك
+DUGZDUH % VW XQLW +DUGZDUH $ QG XQLW
+DUGZDUHWRKDUGZDUH FRQQHFWLRQ ,QFRUUHFW FDVH 26ROXWLRQ UHFRJQL]HV KDUGZDUH % DV VW XQLW
7. Hardware - to - Hardware Connection Function
7. 3 Hardware - to - Hardware Connection Method
45