Online USV XANTO RT1000, Manual

Page: 63 / 129

Seite 62 von 128
stant 230V, 50Hz power supply. During battery operation:
inverter is supplied with power from the battery.
•
Bypass:
In the event of a fault (e.g. overtemperature or overload),
the bypass module protects the internal electronics against
irreparable damage. In the event of a fault, the load supply
is automatically switched to bypass mode and the loads are
supplied with power from the building’s normal mains sup-
ply
WITHOUT battery back-up. This operating state is indi-
cated on the front panel and in the form of information via
the software.
•
Charger:
During charging, the internal charger supplies the batteries
with a constant current of 1A.
•
Battery / accumulator:
Maintenance-free, sealed lead gel accumulator.
7.2 Interface connections
With the XANTO RT series, the back panel of the UPS system
is equipped with a DB9-port and a slot for optional interface
cards. Computers can be connected to either of them.
The DB9-socket supports communication on the basis of the
RS-232 protocol as well as the use of dry contacts.
These connections enable the following:
•
Monitoring of the UPS system,
•
Monitoring of the input voltage,
•
Automatic data back-up,
•
Computer shutdown and
•
UPS system shutdown.
These functions are supported by the DataWatch software,
which is included in the scope of supply.