Onkyo HT-RC560, Owner'S Manual

Page: 64 / 140

Advanced Operations
En-64
Operating
procedure
(
➔
page 52 )
OSD Setup
■
On Screen Display
`
On
`
Off
This preference determines whether operation details
are displayed on-screen when an AV receiver
function is adjusted.
Even when “
On ” is selected, operation details may
not be output if the input source is connected to an
HDMI IN .
■
Language
(North American models)
`
English , Deutsch, Français, Español, Italiano,
Nederlands, Svenska
(European, Australian and Asian models)
`
English , Deutsch, Français, Español, Italiano,
Nederlands, Svenska,
Русский язык
, 中文
(Taiwanese models)
`
English , Deutsch, Français, Español, Italiano,
Nederlands, Svenska, 中文
This setting determines the language used for the on-
screen menus.
■
Screen Saver
`
3min, 5min, 10min
`
Off
With this setting, you can set the time until the screen
saver activates itself. Once active, the screen saver
will go off and the screen will return to its previous
state if the AV receiver is operated in any way.
Tuner
■
AM/FM Frequency Step (North American and
Taiwanese models)
`
10kHz/200kHz :
`
9kHz/50kHz :
Select the frequency step according to your
area.
■
AM Frequency Step (European, Australian and
Asian models)
`
10kHz :
`
9kHz :
Select the frequency step according to your
area.
For AM/FM tuning to work properly, you must specify
the AM/FM frequency step used in your area.
Note
• When this setting is changed, all radio presets will be
deleted.
HDMI
■
HDMI CEC (RIHD)
`
Off
`
On
Turn this setting on to allow
p
-compatible
components connected via HDMI to be controlled by
the AV receiver (
➔
page 16 ).
Note
• When the setting is set to “ On ” and the menu is closed, the
names of connected p -compatible components and
“ RIHD On ” are displayed on the AV receiver.
“ Search… ”
→
“ (name) ”
→
“ RIHD On ”
When the AV receiver cannot receive the name of the
component, it is displayed as “
Player
*
” or “ Recorder
*
”, etc.
(“ * ” shows up and indicates the number of components,
when two or more are received).
• When an
p
-compatible component is connected to
the AV receiver via an HDMI cable, the name of the
connected component is displayed on the AV receiver
display. For example, while you are watching TV
broadcasting, if you operate a Blu-ray Disc/DVD player
(being powered on) with the remote control of the AV
receiver, the name of the Blu-ray Disc/DVD player will be
displayed on the AV receiver.
• Set it to
“
Off
” when a connected piece of equipment is not
compatible or it is unclear whether the equipment is
compatible or not.
• If operation is not normal when set to “ On ”, change the
setting to
“
Off
”.
• Refer to the connected component’s instruction manual for
details.
• When the “ HDMI CEC (RIHD) ” setting is set to “ On ”, the
power consumption on standby mode slightly increases.
(Depending on the TV status, the AV receiver will enter
standby mode as usual.)
• The p control does not support HDMI OUT SUB .
Use HDMI OUT MAIN instead.
• When the source equipment is connected with the
u
connection, it may malfunction if “ HDMI CEC (RIHD) ” is set
to “ On ”.
7. Hardware Setup