Playback
En-47
The Home menu provides quick access to frequently
used menus.
Tip
• The on-screen menus appear only on a TV that is
connected to
HDMI OUT MAIN
.
■
Setup
`
With this selection, you can access the common
settings of the on-screen Setup menu.
Press
ENTER
to display the Setup menu
(
➔
page 52
).
■
InstaPrevue
`
With this selection, you can preview audio/video
streams coming from HDMI inputs (
HDMI
IN 1
/
2
/
3
/
4
/
5
). Even with multiple components
connected through HDMI, you can easily switch
between inputs as their previews are displayed on
a single screen.
Press
ENTER
to display the main preview
(currently selected HDMI input) and the
additional previews (other HDMI inputs). Using
q
/
w
or
e
/
r
to select a preview thumbnail and
pressing
ENTER
will switch the AV receiver to
that input source.
■
Firmware Update
`
With this selection, you can update the firmware
of the AV receiver. Note that this selection will be
grayed out for a short while after the AV receiver
is turned on. Please wait until it becomes
operable.
Press
ENTER
to start the procedure
(
➔
page 85
).
■
Network Service
You need to connect the AV receiver to your home
network (
➔
page 16
,
27
).
`
With this selection, you can use various Internet
radio services or play the contents stored in media
connected to your home network (
➔
pages 32
to
36
). Note that this selection will be grayed out for
a short while after the AV receiver is turned on.
Please wait until it becomes operable.
Press
ENTER
to display the network service
screen. If you want to use the Internet radio
services, use
q
/
w
/
e
/
r
to select the desired
service. Pressing
ENTER
again switches to that
selection. If you want to play music files on a
computer or media server, use
q
/
w
/
e
/
r
to
select “
DLNA
” and then press
ENTER
. If you
want to play music files on a computer or NAS
(Network Attached Storage), use
q
/
w
/
e
/
r
to
select “
Home Media
” and then press
ENTER
.
■
USB
`
With this selection, you can play contents of
portable players and USB storage devices
connected to the AV receiver’s
USB
port
(
➔
page 32
). Note that this selection will be
grayed out for a short while after the AV receiver
is turned on. Please wait until it becomes
operable.
Press
ENTER
to select a drive or browse the
contents of the media connected, followed by
q
/
w
to select the desired folder or track.
Pressing
ENTER
as a track is selected will start
playback.
Using the Home Menu
1
Press RECEIVER followed by HOME.
The Home menu will be superimposed on the TV
screen.
Tip
• Alternatively, you can use
HOME
on the AV receiver.
2
Use
e
/
r
or
q
/
w
and ENTER to make the
desired selection.
Press
HOME
to close the menu.
Tip
• You can also access frequently used settings from Quick
Setup (
➔
page 48
).
Tip
• If no video signals are present, the thumbnails will be
filled in black.
• You can specify the number of preview thumbnails as
well as their positioning on screen (
➔
page 66
).
Note
• This function cannot be selected when:
–
HDMI IN 6
is the current HDMI input source, or
– No signal is present on the current input source.
• Depending on video signals, the picture may not be
properly rendered on the preview thumbnails of
InstaPrevue.
Summary of Contents for HT-RC560
Page 94: ...Appendix En 94 Memo ...
Page 95: ...Appendix En 95 Memo ...
Page 116: ...SN 29401478IRUS Y1212 1 2 9 4 0 1 4 7 8 I R U S ...
Page 139: ...Remote Control Codes 19 Memo ...
