background image

Remote Control Codes

3

Codici del telecomando

Fernbedienungscodes

1

Tenendo premuto il tasto REMOTE MODE al quale si desidera assegnare il 
codice, premere e tenere premuto [DISPLAY] (per circa 3 secondi).

Il tasto REMOTE MODE/l'indicatore Remote si accende.
Sui prodotti Integra, i nomi dei tasti sono scritti con l'iniziale maiuscola. Ad esempio, 
tasto “Remote Mode” e tasto “Display”.

Note:

• I codici di controllo del telecomando non possono essere inseriti per [RECEIVER] e i tasti multi 

zona.

• Per [TV] è possibile immettere solo codici telecomando del televisore.
• Tranne che per [RECEIVER], [TV], e per il tasto multi zona, è possibile assegnare codici di 

controllo di ogni categoria per i tasti REMOTE MODE. Tuttavia, tali tasti fungono anche da 
tasti del selettore d'ingresso, quindi scegliere un tasto REMOTE MODE che corrisponda 
all'ingresso al quale viene collegato il dispositivo. Per esempio, se si collega il lettore CD 
all'ingresso CD, scegliere il [TV/CD] quando si immette il relativo codice telecomando.

2

Entro 30 secondi utilizzare i tasti numerici per inserire il codice telecomando a 5 
cifre.

Il tasto REMOTE MODE/l'indicatore Remote lampeggia due volte.
Se il codice telecomando non viene inserito correttamente, il tasto REMOTE 
MODE/l'indicatore Remote lampeggia lentamente una volta.

Note:

• L'elemento lampeggiante del telecomando varia a seconda del modello del ricevitore AV.
• Il telecomando è preconfigurato con preselezioni per diversi apparecchi. Inserendo un codice 

dall'elenco dei codici telecomando, è possibile attivare la relativa preselezione per tale 
apparecchio.

• Se sono presenti più codici relativi allo stesso produttore, provare a inserirli uno a uno finché 

non si arrivi al codice corrispondente dell'apparecchio.

• A seconda del modello e dell'anno dell'apparecchio, la compatibilità non è garantita.
• Con alcuni modelli, il telecomando può non funzionare o la sua compatibilità può essere limitata 

a una parte della funzionalità dell'apparecchio.

• Inoltre, non è possibile aggiungere nuovi codici alle preselezioni esistenti del telecomando.
• I codici telecomando specificati sono validi alla data della stampa del presente documento, ma 

sono soggetti a variazioni da parte del produttore.

1

Halten Sie die REMOTE MODE-Taste gedruckt, fur die Sie den Code eingeben 
mochten, und drucken Sie (ca. 3 Sekunden lang) die [DISPLAY]-Taste.

Die REMOTE MODE-Taste/Remote-Anzeige leuchtet.
Bei den Integra-Produkten werden die Namen der Tasten groß geschrieben. Zum 
Beispiel „Remote Mode“ (Fernbedienungsmodus)-Taste und „Display“-Taste.

Hinweise:

• Der Fernbedienungscode kann nicht [RECEIVER] und der Multi-Zonen-Taste zugeordnet 

werden.

• Der Taste [TV] können nur Fernbedienungscodes für einen Fernseher zugeordnet werden.
• Abgesehen von [RECEIVER], [TV] und der Multi-Zone-Taste, können die 

Fernbedienungscodes jeder Kategorie den REMOTE MODE-Tasten zugewiesen werden. 
Allerdings dienen diese Tasten auch als Quellenwahltasten. Wählen Sie also nach Möglichkeit 
eine REMOTE MODE-Taste, die dem Eingang zugeordnet ist, an den Sie die betreffende Quelle 
angeschlossen haben. Wenn Sie z.B. einen CD-Player an den CD-Eingang anschließen, sollten 
Sie [TV/CD] wenn Sie den Fernbedienungscode eingeben.

2

Geben Sie mit den Zifferntasten innerhalb von 30 Sekunden den 5-stelligen 
Herstellercode ein.

Die REMOTE MODE-Taste/Remote-Anzeige blinkt zwei Mal.
Wenn der Fernbedienungscode nicht ordnungsgemäß eingegeben wurde, blinkt die 
REMOTE MODE-Taste/Remote-Anzeige einmal langsam.

Hinweise:

• Das blinkende Element auf der Fernbedienung unterscheidet sich je nach AV-Receiver-Modell.
• Die Fernbedienung ist mit den Voreinstellungen der Fernbedienung der verschiedenen 

Komponenten vorkonfiguriert. Indem ein Code aus der Liste der Fernbedienungscodes 
eingegeben wird, können Sie die entsprechende Voreinstellung für die Komponente aktivieren.

• Wenn es mehrere Codes gibt, die sich auf einen Hersteller beziehen, versuchen Sie sie einzeln 

einzugeben, bis einer mit Ihrer Komponente übereinstimmt. 

• Dies hängt vom Modell und Herstellungsjahr Ihrer Komponente ab und die Kompatibilität ist 

nicht garantiert.

• Es kann sein, dass bei einigen Modellen die Fernbedienung nicht funktioniert oder ihre 

Kompatibilität sich auf nur auf Teile der Funktionalität der Komponente beschränkt. 

• Abgesehen davon ist es nicht möglich, den bestehenden Voreinstellungen der Fernbedienung 

neue Codes hinzuzufügen.

• Obwohl die angegebenen Fernbedienungscodes dem Stand bei Drucklegung entsprechen, sind 

Änderungen durch den Hersteller vorbehalten.

Summary of Contents for HT-RC560













































































































































Reviews: