Page 11 of 16
Rev 1
MISUSE AND FAILURE TO FOLLOW THESE INSTRUCTIONS MAY TRIGGER THE
OVERHEAT PROTECTION SYSTEM AND RENDER THE HEATED THROW
PERMANENTLY INOPERATIVE. THIS MAY INVALIDATE THE WARRANTY.
IMPORTANT:
DO NOT Cover The Controller At Any Time.
The Heated Throw must not be used in Bed or while sleeping.
TURN OFF AND UNPLUG WHEN NOT IN USE
Store in dry place when finished.
7 Recommended Cleaning Instructions
Ensure the Controller is Unplugged from the Power Point and
Disconnected from the Heated Throw Before Cleaning
Do Not Wring, Do Not Spin Dry, Drip Dry Only
7.1 Treatment For Localised Soiling
Never Use Hot Water
as the Heated Throw may shrink and will void your
warranty.
NOTE: DO NOT
Pre-Soak or use stain removers of any kind which contain
Bleach. This includes any of the Oxy pre-soakers or Stain Removers
Detach and Remove the Controller before cleaning the Throw.
•
The area affected should be sponged gently using a natural wool detergent or
mild soap flakes dissolved in cold water, followed by two consecutive spongings
using clean, soap-free cold water.
Summary of Contents for T624W100DA2b
Page 2: ...Page 2 of 16 Rev 1 ...
Page 4: ...Page 4 of 16 Rev 1 ...
Page 16: ...Page 16 of 16 Rev 1 ...