manualshive.com logo in svg

Onicon SYS-40-010, Installation And Operation Manual, Page: 9 / 59

Share
Download
Onicon SYS-40-010 Installation And Operation Manual Download Page 9

ONICON Incorporated 727-447-6140 

Page 9 

www.onicon.com

SYSTEM-40 BTU MEASUREMENT SYSTEM

1.7 SERIAL NUMBER

SECTION 2.0 

UNPACKING

2.1 CHECKING THAT YOU HAVE 

RECEIVED EVERYTHING

1.5 ADDITIONAL HARDWARE 

REQUIRED

ONICON’S System-40 is a true heat (BTU) computer, which accepts data from 

several sensors, performs a series of computations with that data, and displays 

and/or transmits the results as an indication of the amount of heat (BTU) being 

transferred per unit time or as a totalized amount. 
For direct insertion style meters, a customer supplied line size threaded tee is 

required.  The kit is ordered with the meter to install the remote temperature 

sensor.
For remote style meters, two tees are required. The tees are used with the two ½” 

NPT thermowells ordered with the meter. 2½” meters are provided with raised 

face flanges. Mating flanges, flange gaskets and mounting hardware are required 

to complete the installation.

1.6 WORKING 

ENVIRONMENT

The System-40 was designed for installation and use indoors in residential, 

commercial and light industrial environments that are free of corrosive liquids 

and fumes, temperature extremes and excess vibration. It may be installed 

outdoors in protected spaces away from direct sunlight and rain, sleet or snow.

The operating ambient air temperature range is -13°F to 131°F. Electrical power 

should be clean, free of excess high frequency noise and large voltage transients.

The serial number is a unique identifier for the product, located on the side of 

the enclosure. Please have this number available when contacting ONICON for 

assistance.

The System-40 BTU Meter is generally shipped in one package unless optional 

hardware or equipment is ordered. Notify the freight carrier and ONICON if any 

items are damaged in transit.

The following items are normally provided with the System-40 BTU Meter:

• 

Two (2) line size process connection meter couplings with male NPT threads 

and sealing gaskets (shipped attached to meter)

• 

One (1) line size NPT (or copper sweat) x M10 bushing for the remote 

temperature sensor OR two (2) thermowells with ½” male NPT threads

• 

One (1) System-40 Installation and Operation Guide 

• 

One (1) System-40 Certificate of Calibration

Please notify ONICON if any of these items are missing.

Summary of Contents for SYS-40-010




























































Reviews:

No comments