background image

SKU 92513

For technical questions, please call 1-800-444-3353.         Page 5

GROUNDING

WARNING!

Improperly connecting the grounding wire can result in the risk of electric

shock.  Check with a qualified electrician if you are in doubt as to whether the

outlet is properly grounded.  Do not modify the power cord plug provided with

the tool.  Never remove the grounding prong from the plug.  Do not use the

tool if the power cord or plug is damaged.  If damaged, have it repaired by

a service facility before use.  If the plug will not fit the outlet, have a proper

outlet installed by a qualified electrician.

GROUNDED TOOLS: TOOLS WITH THREE  PRONG  PLUGS

1.

Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug.  The plug must be connected to a properly grounded outlet.  If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of elec-
tric shock.  (See Figure A.)

2.

The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool.  The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached
to an electrically “live” terminal.  (See Figure A.)

3.

Your tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances.  The plug and outlet
should look like those in the following illustration.  (See Figure A.)

FIGURE A

Summary of Contents for 92513













Reviews: