SKU 92513
For technical questions, please call 1-800-444-3353. Page 3
ELECTRICAL SAFETY
3.
Grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. Never remove the grounding
prong or modify the plug in any way. Do not use any adapter plugs. Check
with a qualified electrician if you are in doubt as to whether the outlet is prop-
erly grounded. If the tools should electrically malfunction or break down, ground-
ing provides a low resistance path to carry electricity away from the user.
4.
Double insulated tools are equipped with a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install a polarized outlet. Do not change the plug in
any way. Double insulation
eliminates the need for the three wire grounded
power cord and grounded power supply system.
6.
Do not abuse the Power Cord. Never use the Power Cord to carry the tools or
pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp
edges, or moving parts. Replace damaged Power Cords immediately. Dam-
aged Power Cords increase the risk of electric shock.
7.
Do not charge this unit outdoors.
PERSONAL SAFETY
8.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
TOOL USE AND CARE
9.
Do not use the Lantern if the Power Switch does not turn it on or off. Any
Lantern that cannot be controlled with the Power Switch is dangerous and must be
replaced.
10.
Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Lantern. Such preventive
safety measures reduce the risk of starting the charging accidentally.
11.
Store idle Lanterns out of reach of children and other untrained persons.
Lanterns are dangerous in the hands of untrained users.
12.
Maintain tools with care. Keep Lanterns clean. Do not use a damaged Lantern.
Tag it “Damaged, do not use” until repaired.
13.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the Lantern’s operation. If damaged, have
the Lantern serviced before using. Many accidents are caused by poorly main-
tained products.
