background image

SKU 92513

For technical questions, please call 1-800-444-3353.         Page 2

PRODUCT SPECIFICATIONS

SAVE THIS  MANUAL

You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram.  Keep your invoice with this manual.  Write the invoice number
on the inside of the front cover.  Keep this manual and invoice in a safe and dry
place for future reference.

Power Supply (for charging)

120 V, 60 Hz

Bulb Type

H3 x 8 Watt Halogen Lamp

Battery

6 VDC, 4.5 Ah, UL Listed,
Sealed Lead Acid

Charger

AC to 12V DC Wall Charger

Charging Time

10 Hours (using AC adapter)

Running Time

6 Hours (Low), 3 Hours (High)

Overall Dimensions

7-1/8” L x 7-1/8” W x 11” H

Weight

4.25 Lbs.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow  all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE  INSTRUCTIONS

WORK AREA

1.

Keep your work area clean and well lit.  Cluttered benches and dark areas
invite accidents.

2.

Do not operate power products in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust.  
Power products create sparks which
may ignite the dust or fumes.

Summary of Contents for 92513













Reviews: