Installation Instructions EC 2-25 Lift
(Subject to technical alterations! - Status 09/2018)
This is a translation. The German original shall prevail.
Page 4 of 50
Important:
•
All work connected with the transport, electrical connections, commissioning
and maintenance and servicing of the drive must only be carried out by quali-
fied specialist personnel. Improper actions can cause serious injuries and equip-
ment damage.
Caution!
Important note on elevator machine EC 2-25 Lift:
•
The high efficiency of the elevator machine means the self-locking capacity is
negligible, i.e. the drive will start to move immediately as soon as the brake is
released.
•
When installing the safety catching device, the brake system must be fully functional and
guarantee that the service brake is ready to be applied immediately at any times.
•
Elevator machine operation without a fully functional safety catching device is prohibited.
The operator has sole liability for all and any injuries and damage.
•
Recurring checks and tests may not lead to excessive wear, stresses or strains which could
impair the operational safety of the elevator.
Periodic tests can be done with test weights and nominal speed
Alternatively the tests can be done with an empty car and nominal speed ( up to v = 2ms
-1
).
•
Releasing the elevator car from the safety catching device may only be done by moving the
elevator car in the opposite direction to the direction that caused the safety catching device
to activate. Under all operating conditions, the elevator drive may only be operated with the
max. permissible loads as specified by the elevator specifications. All and any procedures and
applications causing additional static and dynamic loads (torque, force, vibration etc.) on the
elevator drive e.g. on the traction sheave, motor, brake, housing, are prohibited. OMS refuses
all and any warranty and/or liability claims if this is not complied with, irrespective of legal
basis.
•
Ensure the motor does not rest on or against the mounting frame. Take appropriate measures
to ensure the above and check that this is done in each and every case. Record these
measures in a protocol as documentary proof.
Summary of Contents for Hypodrive EC 2-25 Lift
Page 2: ......
