Installation Instructions EC 2-25 Lift
(Subject to technical alterations! - Status 09/2018)
This is a translation. The German original shall prevail.
Page 8 of 50
Fig. 1 : Contact areas 1-5 and A-D
3.1.2
Mount and connect the complete elevator machine
Fix the machine in the position as in the order using the four mounting holes in the gear unit
base. Using the through-holes in the support frame and bolts and nuts to ensure secure at-
tachment is recommended.
Bolts:
M 24 quality 12.9
Torque:
800 Nm
On delivery, the traction sheave is not fitted to the elevator machine EC 2-25 Lift.
The traction sheave must be fitted on the adapter flange as described under 6.4.
Prior to commissioning:
Replace the marked screw plug
on the gear housing by the oil dipstick or bleeder valve includ-
ed with the delivery.
Ensure that the gear unit is positioned correctly (see fig. 5a, b). Keep the screw plug in a safe
place where it is easy to find in case the machine needs to be transported at a later date.
4
3
5
1
2
A
D
C
B
Summary of Contents for Hypodrive EC 2-25 Lift
Page 2: ......
