Installation Instructions EC 2-25 Lift
(Subject to technical alterations! - Status 09/2018)
This is a translation. The German original shall prevail.
Page 6 of 50
2.5
Instructions for safe use
Should changes be detected during the service life of the machine, e.g. due to wear, ageing
etc., remedy these immediately in accordance with these installation and maintenance instruc-
tions.
The gear unit may only be opened by OMS in the OMS factory, otherwise the warran-
ty/guarantee is invalid and OMS refuses all and any warranty and/or liability claims.
2.6
Installation and maintenance personnel requirements
Commissioning, maintenance and/or repairs on the electrical parts of the machine may
only
be
carried out by trained and qualified personnel.
Qualified personnel:
Qualified personnel is defined as persons who due to their education and training, experience,
special training and instruction as well as their knowledge of all pertinent norms and standards
and general and statutory specifications, requirements and regulations, accident prevention
regulations and operating conditions as authorised by those responsible for the safety of the
system to carry out the necessary work and thereby recognise and avoid potential hazards.
(Qualified personnel are defined in IEC 364)
Please read these provided installation and maintenance instructions thoroughly and carefully.
They will help you to avoid potential errors or problems at commissioning and during machine
operation.
2.7
General information
Should damage occur during transport or should any errors, defects or non-conformances be
detected during machine commissioning, contact OMS immediately and report the error, de-
fect, non-conformance or damage.
In the case of water damage, contact OMS.
The decision as to whether repairs can be made on site and whether the elevator machine is
still operable can only be made after contacting OMS and gaining their approval. If necessary,
the machine must be returned to OMS in the original packaging.
The original packaging must therefore be kept until after commissioning.
OMS accepts no responsibility for any freedom from patent restrictions and/or patent secure-
ment and/or protection or similar regarding the arrangement and/or the correct installation
and/or function of the elevator machine in the shaft.
The manufacturer and/or operator of the elevator has sole responsibility for freedom from pa-
tent restrictions and similar.
Summary of Contents for Hypodrive EC 2-25 Lift
Page 2: ......
