Omron ZX Series, Operation Manual

Page: 172 / 188

Ratings/Specifications Section 6-1
152
6-1-2 Through-beam Sensor Heads
Note 1. This value is obtained by converting the deviation (±3
σ
) in the linear
output that results when the Sensor Head is connected to the Ampli-
fier Unit, into the measurement width.
2. For a measurement distance of 0 to 500 mm and an average count of
64. The value is 5
μ
m for an average count of 32. This is the value that
results when a minimum sensing object blocks the light near the cen-
ter of the 1-mm measurement width.
3. For an average count of 64. The value is 5
μ
m for an average count of
32.
Item ZX-LT001 ZX-LT005 ZX-LT010
Applicable Amplifier
Units ZX-LDA11/41
Light source Visible-light semiconductor laser (650-nm wavelength)
Output 0.2 mW max. 0.35 mW max.
Measurement
distance 0 to 500 mm 500 to
2,000 mm 0 to 500 mm
Measurement width 1-mm dia. 1- to 2.5-mm
dia. 5 mm 10 mm
Minimum sensing
object
8-
μ
m dia.
(opaque)
8- to 50-
μ
m
dia. (opaque)
0.05-mm dia.
(opaque) 0.1-mm dia.
(opaque)
Resolution
(See note 1.)
4
μ
m
(See note 2.)
---
4
μ
m (See note 3.)
Temperature
characteristic 0.2% F.S./
°
C max.
Ambient
illumination Incandescent lamp: 10,000 lx max. (on light receiving side)
Ambient
temperature Operating: 0 to 50
°
C, Storage:
−
25 to 70
°
C
(with no icing or condensation)
Ambient humidity Operating and storage: 35% to 85%
(with no condensation)
Degree of
protection IEC 60529, IP40
Cable length Extendable up to 10 m with special extension cable.
Weight
(packed state) Approx. 220 g
Materials Case: Polyetherimide, Case cover: Polycarbonate,
Unit cover: Glass
Tightening torque 0.3 N·m max.
Accessories Optical axis adjustment seal, sensor head-amplifier connection
cable, instruction sheet