14
ZFV-C
Non-procedural Communication Command Reference
Example of Usage
(2) Select the Settings tab, and then ASCII Setup.
(3) Mark the following checkboxes, and click OK to complete the setting.
3.
Set the communication conditions for the ZFV-C.
(1) Set [System2]-[Communication] to match the above settings.
4.
Switch the ZFV-C to the RUN mode.
5.
Execute non-procedural communication.
Summary of Contents for ZFV-C
Page 1: ...Smart Sensor ZFV C Non procedural Communication Command Reference Cat No Z244 E1 01...
Page 18: ...16 ZFV C Non procedural Communication Command Reference Example of Usage MEMO...
Page 19: ...17 ZFV C Non procedural Communication Command Reference Example of Usage MEMO...
Page 20: ...18 ZFV C Non procedural Communication Command Reference Example of Usage MEMO...