![background image](http://html1.mh-extra.com/html/omron/zfv-c/zfv-c_command-reference-manual_744108004.webp)
2
ZFV-C
Non-procedural Communication Command Reference
Setting the Communication Specifications
Setting the Communication Specifications
Change the settings of the controller communication specifications for non-procedural
communication with the external device.
Use a USB cable or RS-232C cable to connect ZFV-C controllers to external devices.
For the USB cable connection, download and install the USB driver beforehand.
For the USB driver, please contact your OMRON representative.
1.
Switch the controller to [MENU].
2.
Select [System2] - [Communication] to set the appropriate communication
specifications for the external device.
3.
Switch the controller to [RUN]. (This executes the save.)
Communication commands are accepted only in the RUN mode.
Summary of Contents for ZFV-C
Page 1: ...Smart Sensor ZFV C Non procedural Communication Command Reference Cat No Z244 E1 01...
Page 18: ...16 ZFV C Non procedural Communication Command Reference Example of Usage MEMO...
Page 19: ...17 ZFV C Non procedural Communication Command Reference Example of Usage MEMO...
Page 20: ...18 ZFV C Non procedural Communication Command Reference Example of Usage MEMO...