Omron YRCX Series, Operation Manual

Page: 97 / 266

4
Edit
4-11
Valid keys Menu Function
CUT
Sets the cut contents, deletes the selected contents, and saves the data into the buffer
temporarily.
PASTE Inserts the data saved in the buffer to a portion immediately before the cursor line.
FIND Specifies the character string you want to find.
JUMP Displays the program from the specified line.
CHECK Checks the program entry error, etc.
Step 1
Put the program in the editable status.
When pressing the F2 key (EDIT) on the "PROGRAM SELECTION" screen (Edit Program Edit), the program
is displayed and it can be edited.
Inputting the program
Step 2
Step 2
Input the program.
Use the cursor keys to move the cursor to the
position where to edit the program, and then
input the program with the programming
box.
Up to 255 characters can be input for one
line. Input the program for one line, and then
press the ENTER key at the end.
The program entry is completed and the
cursor then moves to the top of the next line.
NOTE
One program consists of up to 9999 lines and the maximum program capacity is approximately 2100 KB.
Since the program area is shared with the point data, the capacity may decrease depends on the amount of
point data.
Example) When the amount of point data is 10000, the capacity decrease 600 KB and approximately 1500 KB
can be used for the program.
Step 3
Exit the program editing.
After the program entry has been completed, press the ESC key to exit the program editing.
2.3.1 Cursor movement
• When pressing the cursor key, the cursor moves up or down one line. Additionally, when changing the scroll
function to the ON status with the SCROLL ON key, pressing the cursor key will move up or down the cursor
ten lines.
• When pressing the cursor key, the cursor moves left or right one line.
2.3.2 Quitting program editing
Press the ESC key to quit editing program.
2.3.3 Switching between the "insert" and "overwrite" modes
When pressing the INS key, the insert and overwrite modes are changed alternately.
When changing the overwrite mode to the insert mode, the cursor shape changes from " " to " " and the
character to be input is inserted to a portion immediately before the cursor position.
When changing the insert mode to the overwrite mode, the cursor shape changes from " " to " " and the
character to be input is overwritten on the character at the cursor position.