Omron WE70-AP, Operation Manual

Page: 106 / 146

Chapter 5. Setup Menu
5-8
AP
5
Setup
Menu
(3) PSK (Pre-Shared Key) .... You can enter an encryption key in alphanumeric characters.
This setup can be specified if "TKIP", "AES", or "WOC KEY" is selected
in the [Encryption method] (1).
* The same encryption key must be configured for communication partners using the same
encryption method.
* Enter 64-digit number if you want to use hexadecimal number.
* To use WOC KEY (OC security)", enter an 8 to 63 alphanumeric characters. You cannot
enter 64-digit hexadecimal number. Enter an ASCII character string.
* Enter an 8 to 63 character string if you want to use an ASCII character string.
(4) Key index ......................... You can specify a text box number for a key to encrypt send data, from 1
to 4 in the [WEP key] if an encryption method of "WEP RC4 64(40)",
"WEP RC4 128(104)", "WEP RC4 152(128)", or "OCB AES 128(128)" is
selected in [Encryption method] field (1). (Factory Shipment Status: 1)
If encryption keys specified in boxes from 1 to 4 are the same as those of
a communication partner, communication is available even if different
numbers are set between communication partners.
* If you want to specify a key index of a wireless LAN terminal for a wireless unit and use
Windows XP (except for Service Pack applied) standard wireless network connection, a
range of selection becomes from 0 to 3, which is different from a wireless unit.
Selecting "1" for a wireless unit is same as specifying "0" in Key index (advanced) in
Windows XP.
(1) Input mode ....................... You can select a mode for entering an encryption key. (Factory Shipment
Status: Hex.)
* If an ASCII character is specified, [Key generator] in [Encryption method] cannot be used.
(2) Key Input Box .................. If you do not use the key generator, directly enter a key for encryption
and decryption with a specified mode in the [Input mode](1) field. (Factory
Shipment Status: 00-00-00-00-00)
If [ASCII character] is specified in the [Input mode](1) field, entering other
characters than hexadecimal number is invalid. (Alphanumeric character
only)
* It is recommended to specify the same encryption key values for communication partners
in respective key index (1 to 4).
Communication will not be available if the other part of the communication uses a differ-
ent value.
●
WEP key
This item specifies an encryption key to be used for "WEP (RC4)" or "OCB AES" encryption type.
(1)
(2)