Omron WE70-AP, Operation Manual

Page: 38 / 146

Chapter 2. Installation & Connection
2-6
2
Installation
&
C
onnection
●
To Mount on a DIN Rail
Do not install a product with a pencil-type antenna in a metal panel as it may result in degradation of radio
performance.To install this product in a panel, use and install a magnetic-base antenna outside the
panel.See "Options" of "Appendices", "Antenna" (P.Appendix-3).
Applicable Rail
There are 2 types of rails with a width
of 35mm, height of 7.5mm or 15mm.
(Conformance to DIN, EN, IEC, and
JIS C2812 standards)
Mounting DIN Rail Adapter
Model Rail Specification
WT30-FT001 TH35-7.5 Rail width 35mm and height 7.5mm
WT30-FT002 TH35-15 Rail width 35mm and height 15mm
Pull it to the right and lower it while pressing the spring.
Insert a spring
Hold the part A and insert the tip
A
27
7.5
0
-0.4
1
±
0.04
1
±
0.04
24
15
15
DIN rail length (unit mm)
Part A
35
±
0.3
Less than 0.3
TH35-7.5 Details
of part A TH35-7.5 Details
of part A
Mounting screws for this wireless
unit must be tightened with torque
of 4.4 to 5.3in. lb. (0.5 to 0.6N.m)
Mount it on the main unit and
clamp it using screws (M3).
<Mounting>
<Demounting>
DIN Rail
Hitch a tab on the top to the DIN rail
Pull the bottom side forwards
DIN Rail
Unhitch a tab from the DIN rail
Pull the lower part
Insert a flat-head screw driver
under the lower tab and pull downward
WE70-AP
LAN MODE
FA WIRELESS LAN ACCESS POINT
POWER WIRELESS