Omron WE70-AP, Operation Manual

Page: 101 / 146

5-3
Chapter 5. Setup Menu
AP
5
Setup
Menu
5-2. Setup Screen (WE70-AP)
■
Network Settings
<Basic settings> Screen
(1)
●
Unit Name/IP Address Setup
You can configure a name and an IP address of an access point.
<Apply> Button ..................... After a setup item in a setup screen is changed, pressing this button
enables items in [Unit Name/IP address settings], other than [IP address]
and [Subnet mask] fields.
* Changing an IP address and a subnet mask are reflected on a screen in respective fields,
but they will not be enabled unless <Apply and restart> is clicked.
<Cancel> Button ................... This button resets changed setup items in a setup screen to original set-
tings before change. Note that the original setting cannot be recovered
after <Apply> or <Apply and restart> button is clicked.
<Apply and restart> Button
..................................... Clicking this button restarts an access point and enables all setup items
changed in the setup screen.
(1) Unit name ......................... You can enter an alphanumeric character string (within 31 characters) as
a unit name. You cannot use symbols #, %, ¥, @, :, and ?.
(Factory Shipment Status:WE70-AP)
(2) IP address ........................ You can enter an IP address of an access point.
(Factory Shipment Status:192.168.0.1)
To connect a wireless unit to an operating network, this address must be
changed to a proper network address of the LAN.
(2)