54
Se
ct
io
n
4
How to
Use Menu
Sheet/Command
V500-R521B2/C2
User’s Manual
Section 4
Setting Method
Input command from the upper equipment
1.
Transmit the command character strings of the function you want to set.
Menu Sheet/Command List p.56
2.
Transmits "Z2", in order to write the set data on the nonvolatile memory in the bar code
reader.
During the bar code reader is processing command, it notifies externally that it is in processing
mode turning off the RS signal line.
When the RS signal line is not connected, interval between inputting commands should be taken
sufficiently.
Be sure to write when a condition is set by inputting command from the upper equipment. When you
turn off the power without writing the setting in the memory, the set content may be deleted.
Transmit command character strings.
Bar code reader
V500-R521
Upper equipment
Command
(In case of one character, m1 only)
V500-R521.book 54 ページ ２００８年７月１８日 金曜日 午後１時１分
