32
Section
2
In
st
alla
tion
V500-R521B2/C2
User’s Manual
Section 2
Wiring and Installation
Installation
To avoid regular reflection of laser, incline approx. 15 ° against the bar code subject to read
when installing the bar code reader. Use this mounting bracket as the mounting surface of an
associated mounting bracket is inclined 15 °. (Tightening torque 0.54 N/m)
1.
Attach the mounting bracket on the bar code reader.
2.
Install.
• When inductive noise is generated at the mounting bracket, attach an associated insulation board.
Use the associated screw to install the insulation board.
• Do not apply stress on the cable when installing or using.
• Distance and angle allowed to read differs according the bar code. Check if the used bar code can
be read actually, before installing.
V500-R521
V500-R521
When you attach this line of the bracket vertically,
the bar code reader inclines 15 °.
When you attach this line of the bracket
horizontally, the bar code reader inclines 15 °.
Horizontal
Vertical
V500-R521.book 32 ページ ２００８年７月１８日 金曜日 午後１時１分
