![background image](http://html1.mh-extra.com/html/omron/v400-r-series/v400-r-series_manual_741432009.webp)
9
III. Operating the Setup Program
1.
Preparing the connection
Select the “File” option from the main menu on the main screen and select “PC Comm. Setting”.
The “PC Comm. Setting” window appears.
On this screen you can select your desired port and communication parameters.
•
By default, the port is set to COM1. Be sure that the port of your PC to which the RS-232C
cable is connected is also set to COM1.
•
To connect to the Setup Program, be sure to set the communications protocol to non-protocol
mode.
•
After you have specified the above settings, click the “Auto Scan Comm.” button. The following
window opens.
If the communications settings have not been successfully detected, you will see a window
similar to the one shown below.
Manually set the communication parameters that match those specified on the code reader.
(At startup of the Setup Program, Baud Rate is set to 9600 bps, Data Length to 8 bits, Parity to
Non, and Stop Bit to 1 bit.)