30
2)
“Reading System” menu
You can change the settings associated with the read operations.
When you select “Reading System”, the following dialog box appears.
You can select the appropriate read mode.
3)
“Reading Conformance” menu
You can change the settings associated with the number of matches.
When you select “Reading Conformance”, the following dialog box appears.
You can select the appropriate number of matches (number of matching reads). One collation is
assumed to be two matching reads. Normally you should specify one or greater.
4)
“Reading Digit” menu
You can lock the number of digits of data to be read.
When you select “Reading Digit”, the following dialog box appears.
Two type of digit locks are available. Digit can be locked within a range of 1 to 32. If a zero is
specified, the program assumes no digit lock is applied.
! CAUTION !
Digit lock is not available for fixed-length codes, such as WPC (JAN/EAN/UPC) or 2D codes, such
as Data Matrix and PDF417.
