13
How to Inhale (Using Optional Parts)
1
Using the unit for a long time
By using the optional “long time nebulisation set (4997217-7)” and the “supply medication set (4997206-1)”,
the unit can nebulise continuously for a long time.
➀
Remove the medication cup cover of the main unit. Attach an optional long time nebulisation set in place
of the medication cup cover and assemble the unit according to the procedure shown on Page 10.
At this time, check that the air duct is not blocked by the air duct cap.
➁
Fill medication into the supply medication bottle.
➂
Tightly close the supply medication bottle cap. At this time, check that the washer is correctly set inside
the cap.
➃
Remove the cap of the supply medication pipe of the long time nebulisation set and attach the tube of the
supply medication set.
➄
Hang the supply medication bottle on a proper place, higher than the device.
At this time, check that the tube is not bent. If the tube is bent, the medication cannot be supplied. If the
tube is too long, cut it to a proper length.
Attach the inhalation hose.
➅
Set the timer to “Continuous”.
➆
Turn the air volume adjustment knob to the far right (the position of 10).
➇
Push the START/STOP Button (
) and start inhalation.
If you use the unit for humidification in combination with oxygen therapy, connect the equipment to the
oxygen supply pipe of the “long time nebulisation set” (optional, 4997217-7). Please refer to the illustration
on the next page.
In order to stop the air from the fan on the main unit during the oxygen therapy, set the “air-flow volume”
adjustment knob to “0”, and attach an air duct cap to the air duct of the long time nebulisation set.
The operating and inhalation methods are the same as those of the normal operation.
Using the unit for (oxygen) humidification
2
Cap
Supply
medication
pipe
Air duct
cap
Air duct
Supply
medication set
(4997206-1)
Supply
medication
bottle
Long time nebulisation
set (4997217-7)
Cap
Tube
NE-U17-E.indb 13
NE-U17-E.indb 13
14/12/2010 13:49:27
14/12/2010 13:49:27
