![background image](http://html1.mh-extra.com/html/omron/sysmac-nj-series/sysmac-nj-series_network-connection-manual_742269028.webp)
7. Connection Procedure
3
Check the Monitor Button and Stop
Monitoring Button on the toolbar of
the Sysmac Studio to see if the
Controller is in monitor status.
Check that the Monitor Button is
selected and is not selectable and
that the Stop Monitoring Button is
selectable (monitor status) as
shown in the right figure.
*If the Controller is not in monitor
status, select
Monitor
from the
Controller Menu of the Sysmac
Studio.
*If the Sysmac Studio is offline, go
online by following steps 4 to 7 of
7.3.1.
Monitor
Stop
Monitoring
4
Select
Watch Tab Page
from the
View Menu.
5
The Watch Window (Controller) Tab
Page is displayed in the lower
section of the Edit Pane.
6
Click the cell that states Input Name
at the bottom of the Watch Tab
Page.
26
Summary of Contents for Sysmac NJ-series
Page 32: ...2013 0911 P529 E1 01...