7. Connection Procedure
3
Refer to the right figure and
check the hardware switches
located on the front panel of the
Sensor Communication Unit.
Set the NODE ADDRESS
switches as follows:
x 100 to 0
x 10
to 0
x 1
to 1
Set the node address to 001.
4
Connect the Ethernet
Communication cable to the
built-in EtherCAT port on the
front panel of the Sensor
Communication Unit.
Connect the power supply to the
power supply connector.
11
Summary of Contents for Sysmac NJ-series
Page 32: ...2013 0911 P529 E1 01...