![background image](http://html1.mh-extra.com/html/omron/sysmac-nj-series/sysmac-nj-series_network-connection-manual_742269014.webp)
7. Connection Procedure
7.3. Setting Up the Controller
Set up the Controller.
7.3.1. Starting the Sysmac Studio and Setting the EtherCAT Network
Configuration
Start the Automation Software Sysmac Studio and set the EtherCAT network configuration.
Install the software and USB driver beforehand.
1
Start the Sysmac Studio.
Click the
New Project
Button.
2
The Project Properties Window
is displayed. Check that
Controller is selected from the
category and NJ501 is selected
from the device in the Select
Device Field. Then, click the
Create
Button.
*In this document, New Project
is set as the project name.
3
The New Project is displayed.
There are Menu Bar and Toolbar
in the upper part of the pane.
The left pane is called Multiview
Explorer, the right pane is called
Toolbox and the middle pane is
called Edit Pane.
Multiview
Explorer
Edit Pane
Toolbox
Menu Bar
Toolbar
12
Summary of Contents for Sysmac NJ-series
Page 32: ...2013 0911 P529 E1 01...