CP1E-E
@@
D
@
-
@
CP1E-N
@@
D
@
-
@/
NA20D
@
-
@
33
Connecting to Support Software
Operating Environment and System Configuration
The following system is required to operate the CX-Programmer. Make sure your system provides the following conditions and has the necessary
components.
Connecting Methods
Using commercially available USB cable, connect the CX-Programmer to the peripheral USB port on the CPU Unit.
Note:
The CX-Programmer cannot be used if it is connected to the built-in RS-232C port or serial option port of a CP1E CPU Unit.
*
Commercially available USB cable: 5 m max., for USB 2.0.
Connecting Cable
Use the following cable to connect the CP1E CPU Unit to the computer running the Support Software.
Item
Description
Supported computer
IBM PC/AT or equivalent
CD-ROM or DVD-ROM drive
One or more
Supported Operating Systems
Windows 7, Windows Vista, Windows XP,
Windows 2000 (Service Pack 4 or later)
(except 64-bit edition)
CPU
Pentium II 333 MHz or faster
RAM
256 MB min. 512 MB or more recommended
Available hard disk space
600 MB min.
Display
800 x 600 SVGA min.
PLC and connection port
USB port
Port at Unit
Port at computer
Network type
(communications mode)
Model numbers
Length
Peripheral USB port
(Conforming to USB 2.0, B connector)
USB port
USB 2.0 (or 1.1)
Commercially available USB cable
(A connector - B connector)
Less than 5 m
USB port
A connector
Commercially available
USB cable
*
Peripheral USB port
(Conforming to USB 2.0, B connector)
B connector
CP1E CPU Unit
CX-Programmer
Summary of Contents for SYSMAC CP1E-E10DR-A
Page 42: ...MEMO 42...
