background image

1

F3SJ-B-02TS

Quick Installation Manual

Introduction

Thank you for purchasing the F3SJ-B



P25-02TS Series Safety Light Curtain (hereinafter referred to 

as the "F3SJ-B-02TS"). 
This document is a brief description from wiring to pre-operation checklists / maintenance checklists of F3SJ-B-02TS.
For details, download and read F3SJ-B-02TS operation manual and user's manual from Omron's website.
https://industrial.omron.us/en/home

Table of Contents

1. What is Included................................................................................................................................1 
2. System Components .........................................................................................................................2 
3. Light Curtain Setup Flow ...................................................................................................................2 
4. Function Selection Flow Chart ..........................................................................................................3 
5.Wiring Examples ................................................................................................................................4 

5-1. EDM not used, auto reset mode, external test used, muting function not used, PNP output ...4 
5-2. EDM used, auto reset mode, external test used, muting function not used, PNP output .........4 

6. Mounting and Beam Alignment .........................................................................................................5 

6-1. Mutual Interference Prevention .................................................................................................5 
6-2. Distance from Reflective Surfaces ............................................................................................5 
6-3. Safety Distance .........................................................................................................................5 
6-4. External dimensions to attach the top/bottom brackets (F39-LJB1) and intermediate brackets (F39-LJB2) ... 6 
6-5. Mounting and Beam Alignment .................................................................................................8 

7. Pre-Operation Checklists / Maintenance Checklists........................................................................11 
Suitability for Use/Contact Information ................................................................................................13 

1. What is Included

For ratings/specifications, input/output circuit, LED indicator status and troubleshooting, refer to 

Safety Light Curtain F3SJ-B-

02TS Series User's Manual

.

Product

Pcs & Details

F3SJ-B



P25-02TS main unit

Emitter x 1, Receiver x 1 

 *1 Vs here means the voltage value under use environment.

 For details, refer to 

F3SJ-B-02TS series user's manual

.

Operation Manual

3

Quick Installation Manual (this document) 

1

Functional Settings

Function

Setting

External Test

Enabled when Vs-3V to Vs*1 applied

External Device 
Monitoring (EDM)

Switching between enable/disable is available by wiring

Auxiliary Output

In case of Basic System
Control Output Information (Output Inversion Function: 
Enabled)

In case of Muting System
Muting/Override Output Information (external indicator 
connected)

Muting

Enabled when muting Key Cap F39-CN10 attached

Override

Enabled when muting Key Cap F39-CN10 attached

Summary of Contents for Sti F3SJ-B P25-02TS Series


























Reviews: