Omron Sti F3SJ-B P25-02TS Series, Quick Installation Manual

Page: 9 / 25

8
F3SJ-B-02TS
Quick Installation Manual
6-5. Mounting and Beam Alignment
Mounting brackets are not included in the product. You must purchase them separately.
1. Loosen the intermediate mounting bracket bolts.
2. Lightly tighten the intermediate mounting bracket to the case.
For position and number of intermediate mounting brackets, refer to 6-4 of this document.
Intermediate Bracket (1)
Hexagon socket head
cap screw (M3 x 12)
Hexagon socket head
cap screw (M3 x 18)
Loosen
Intermediate Bracket (2)
Intermediate Bracket (3)
Loosen
<Backside mounting>
Intermediate Bracket (1)
Turn the intermediate mounting bracket (2) so that
the intermediate bracket (1) should be the bottom.
Intermediate
Bracket (2)
Intermediate Bracket (3)
Intermediate Bracket (1)
Loosen
Intermediate
Bracket (2)
Attach the intermediate
mounting bracket (2) to (3).
Intermediate Bracket (3)
<Side mounting>
Hexagon socket head
cap screw (M3 x 18)
Hexagon socket head
cap screw (M3 x 12)
Intermediate Bracket (1)
Loosen
Intermediate Bracket (2)
Intermediate Bracket (3)
Detach the intermediate
mounting bracket (2) from (3).
Intermediate Bracket (1) Intermediate Bracket (1)
Tighten lightly
Intermediate
Bracket (2)
Intermediate Bracket (2)
Intermediate
Bracket (3)
Intermediate
Bracket (3)
Sensor is secured by
Intermediate Brackets. Sensor is secured by
Intermediate Brackets.
<Side mounting> <Backside mounting>
Optical surface Optical surface
Tighten lightly
Check
position
Step1
Mount
Step2
Align
beams
Step3
Mounting/Beam Alignment Wiring Function Selection
Pre-Operation Checklist /
Maintenance Checklists