Omron SENSOR SUPPORT SOFTWARE S3, Operation Manual, Page: 61 / 66

Display window for new sensor settings New settings of E3NT-R Section 8-5
61
• Display rotated checkbox
When this checkbox is marked, the display on the sensor's display is
rotated by 180°.
This function may be useful when the sensor if fitted in certain positions.
8-5-2-2-2 Economy mode
• Economy mode checkbox
When this checkbox is marked, the sensor's display mode is set to the
energy saving mode.
In the energy saving mode, the display switches off automatically approx-
imately 5 minutes after the last time a push button has been pressed on
the sensor.
8-5-2-3 Locking of sensor
The following locking modes are available for selection in the pulldown menu
of this box:
• No locking
The sensor is not locked. It can be set by push button and PC. The dis-
play on the sensor is active.
• Keylock
With the key lock function, the push buttons on the sensor can be locked
to prevent unintentional changing of the settings.
The lock can be switched on and off on the sensor
.
When the key lock is active, changes can only be made after the Minus
and Plus
buttons are pressed simultaneously for 4 seconds. This tempo-
rarily suppresses the key lock. If no buttons are pressed for about 5 min-
utes, the key lock is automatically activated again
.
• Complete sensor locking
The sensor is completely locked. It cannot be set by push buttons and
PC. When a button is pressed, the display always stays in the normal
mode (analog value display/bar graph).
8-5-2-4 Heating (only available for E3NT-RH
@@
)
The following window heating modes are available for selection in the pull-
down menu of this box.
• Heating off
The sensor window heating is switched off.
• Heating on
The sensor window heating is permanently on.