Omron SENSOR SUPPORT SOFTWARE S3, Operation Manual, Page: 6 / 66

6
Validity Section 1-1
1-1 Validity
These operating instructions apply only in connection with the operating
instructions of a sensor belonging to the E3NT type series.
Read the sensor's operating instructions completely and conscientiously. All
information that is important to working with sensors in the
E3NT type series
can be found in the ABBO 0017 operating instructions.
Pay attention to all safety notes that are contained in the sensor's oper-
ating instructions.
1-2 Use
The SensorSupportSoftware S
3
serves to set sensors in the E3NT type
series and is only capable of operating in connection with these sensors.
1-3 Copyright
For copyright reasons, these operating instructions must not be modified,
amended or shortened.
By using the SensorSupportSoftware S
3
, you acknowledge the following
provisions:
1-3-1 Proprietary right
The software and data are the property of OMROM or its suppliers. Sale and
forwarding of the software or its data for commercial purposes are not permit-
ted.
It is not permitted to modify, alter or shorten the software or its data. In partic-
ular, the name
OMRON must not be removed. It is not allowed to add data
within the software package.
MICROSOFT
®
, MS
®
, MS-DOS
®
, Pentium
®
and WINDOWS
®
are registered
trademarks.
1-3-2 Liability
OMRON does not assume any warranty for the correctness and complete-
ness of software and data; liability for damages resulting from defective soft-
ware and data is rules out.
In all cases,
OMRON's liability is limited to the amount that the customer has
actually paid for this product.
In particular,
OMRON does not assume any liability for damages or data loss
on PCs/laptops as the result of the use of the SensorSupportSoftware S
3
or
the connection of the optical data interface.
©
Copyright 2001 OMRON . All rights reserved.