Omron SENSOR SUPPORT SOFTWARE S3, Operation Manual, Page: 42 / 66

42
Display window for new sensor settings New settings of E3NT-L Section 8-2
8-2-2-1-3 On-switching mode
The on delay of the output is set in the On-switching mode box. This param-
eter can be set separately for both outputs.
The on delay is activated or deactivated with the On delay checkbox.
In the Light-On mode, the on delay is the time from detection of an
object in the switching zone to activation of the relevant switching out-
put.
The on delay can be set in several ways:
• By slider
The position of this slider can be altered with the mouse.
The resulting set delay is displayed next to the slider as a number.
This number can be increased or reduced with the slider's
Increment and
Decrement buttons.
• With number input
The delay can also be entered directly as a number. The slider is adjusted
accordingly
.
The On delay cannot be activated, if Off delay is set to minimum
pulse width or constant pulse width .