manualshive.com logo in svg

Omron SENSOR SUPPORT SOFTWARE S3, Operation Manual, Page: 47 / 66

Share
Download
Omron SENSOR SUPPORT SOFTWARE S3 Operation Manual Download Page 47

Display window for new sensor settings New settings of E3NT-L

Section 8-2

47

8-2-3-1

Application remarks

In the 

Application remarks

 box, you can enter remarks that are saved

together with the settings.
When the file is read again, the remarks again appear in the 

Application

remarks

 box.

8-2-3-2

Display at sensor

The type of display on the sensor can be set in the 

Display at sensor

 box.

8-2-3-2-1

Type of display

The following display formats are available for selection in the 

pulldown

menu

 of this box:

•

Display in m

The current sensing distance is displayed in m on the sensor's display. 

•

Display of column

 

The current sensing distance is displayed on the sensor's display as a bar
graph

8-2-3-2-2

Rotating the display by 180°

•

Display rotated

 checkbox 

When this checkbox is marked, the display on the sensor's display is
rotated by 180°. 
This function may be useful when the sensor if fitted in certain positions.

8-2-3-2-3

Economy mode

•

Economy mode

 checkbox 

When this checkbox is marked, the sensor's display mode is set to the
energy saving mode. 
In the energy saving mode, the display switches off automatically approx-
imately 5 minutes after the last time a push button has been pressed on
the sensor.

Summary of Contents for SENSOR SUPPORT SOFTWARE S3



































































Reviews:

No comments