![background image](http://html1.mh-extra.com/html/omron/powli-bx35f/powli-bx35f_instruction-manual_744605041.webp)
39
5. Maintenance and inspection
Pull on the white label attached to the battery, and
then hold the battery with your hands to remove it.
Be careful not to drop the battery.
Insert the new battery.
(4) Reattach the metal cover and connect the connectors.
• You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s operation is
stopped, but this is not abnormal.
Fit the metal cover into the grooves and slide it to the
left to secure it.
(The battery is secured inside the case.)
Connect the red and black connectors.
(Make sure that the connectors are securely
connected.)
(5) Reattach the front panel.
Fit the left side of the panel on the case, and then
attach it.
Tighten the screw with a screwdriver to secure
the front panel.
●
If liquid (dilute sulfuric acid) leaks from the battery do not touch the fluid.
Do not make the batter pack upside down.
• Doing so could cause burns and, if it is put into your eye, blindness.
• If the liquid touches your eyes or skin, wash it out with lots of clean water and consult your doctor.
• Just put the spare batter pack into the packaging plastic bag and seal it with tape.
●
Do not drop the battery pack.
• Hold the battery securely not to drop it.
●
Do not remove the battery by holding the cables.
Caution
(3) Remove the old battery, and insert the new battery.