manualshive.com logo in svg

Omron POWLI BN100XR, Instruction Manual

Share
Download
Omron POWLI BN100XR Instruction Manual Download Page 46

44

6. Using the UPS monitoring software

6. Using the UPS monitoring software

* If you do not use the UPS monitoring software and contact signal I/O, this step is not

required.

6-1 Performing auto shutdown

Auto shutdown can be performed in the following two ways.

1. Using the included UPS monitoring software

To use the software, your computer must be connected to the UPS in one of the following ways.

●

USB connection .............. Connect using the included USB cable.

●

RS-232C connection ....... Connect using the included RS-232C cable.

●

LAN connection .............. Connect using a separately sold SNMP/Web card and a commercially available

LAN cable

2. Using UPS service of Windows Server 2003/XP/2000

Use the UPS Service Driver installed on the CD-ROM that was included with the UPS, and connect to the
UPS using the method below.

●

RS-232C connection ....... Connect using the included RS-232C cable.

When a power failure occurs, files can be saved, applications can be quit, Windows can be shut down, and
the UPS can be shut down.

3. Using UPS service of Windows NT

The following method must be used to connect the UPS.

●

Contact connection ......... Connect using a separately sold signal I/O card (SC05) and signal cable

(BUC10: for DOS/V).

Summary of Contents for POWLI BN100XR































































Reviews:

No comments

Brands by name

Popular brands

Load more brands